Before you begin painting your kitchen cabinets, you must prepare them properly. You need to remove all the cabinet parts and label them so that you don’t paint over them. It is helpful to use painter’s tape to mark each part. You also need to sand the cabinet parts with the grain, to avoid damaging them. This will open the wood pores and remove any surface abrasions. This will make it easier for you to paint the cabinets.
When painting kitchen cabinets, it is important to find a color that fits the overall design of the kitchen. You may want to sample several paint colors before you choose a final shade. Once you have a color in mind, you can prepare the necessary supplies. Ensure that you have all the paint, brushes and other equipment.
If you plan to paint your cabinets yourself, you should purchase a good paint with a chalky finish. This type of paint doesn’t require primer and gives good coverage. However, you should apply several coats to get the best coverage. It is better to use a brush with a soft bristle rather than a roller, and choose a high-quality paint that is easy to clean.
Before you start painting your kitchen cabinets, you should remove the drawer fronts if possible. If this is not possible, you can cover them with masking tape. Also, you should take note of the location of each hinge on the cabinet doors. Make a sketch of all the doors and drawers before you start painting.
Next, you must remove the cabinet doors so that you can paint them properly. This will prevent drips and allow you to paint the entire cabinet. You should also remove any hardware that you have on the cabinets before painting. Once you’ve removed the door, you should move on to painting the rest of the cabinet.
The first step in painting kitchen cabinets is to clean them thoroughly. You can use dishwashing liquid as a grease-cutting solution. However, it is better to use a dedicated grease-removal product, like TSP, to get the job done correctly. Then, mix the liquid with clear water, rinse, and wipe them dry with a clean rag.
After sanding, you can begin painting your kitchen cabinets. For a glossy finish, you can sand the cabinets using 120 to 220-grit sandpaper or a sanding sponge. You can also use a contoured sander to reach the contours of the paneled doors. For a smooth finish, you can use a commercial sanding sponge or a small sponge wrapped in sandpaper.
Then, you must prime the cabinets with a primer. Primer will protect your kitchen walls and backsplash from paint-related debris. After you have prepared your cabinets with primer, you can paint the cabinet boxes. You can also paint the cabinet doors and drawer fronts. To paint the cabinets, you should allow two hours between coats.